Here are some BASIC instructions for using TTS Datamaster. Since you only have 20 free uses we need to use them as sparingly as possible and not waste any trying to get the software to work. Before you begin you need to know the com port number your cable is attached to. With laptops using a serial cable that is pretty much always COM1 with USB you need to use the USB Find page under the datalogging menu to determine what COM port number is assigned to your USB Cable before proceeding.
Downloading; I have the OLD obsolete version 3.4.1 on my website. The later versions you will need to get from TTS Powersystems. http://www.ttspowersystems.com/DataMaster_downloads2.html
For 1986-89 TPI cars use TTS32
For 1990-92 TPI cars use TTS8D
For Typhoon Syclone 4.3L Turbo use TTSTT
Now if your going to attempt to install the old 3.4.1 or 3.5.1 versions of TTS Datamaster, on a PC running Vista, 7 or 8:
Before running the setup program right click on it. Select Properties from the list and then click the Compatibility tab. From there, pick the default Windows XP SP2, click on the ‘Apply’ button and then click on the ‘OK’ button. Now run the setup program to install the DataMaster program.
In order for the registration tab to work it must be clicked while using as Administrator user. Otherwise it returns a corrupt database error message (invalid signature).
In order to use the 20 free trial runs, you need to invoke the registration form while logged in as administrator. This will generate the initial registration database and allow the trial runs to activate. Otherwise it returns a corrupt database error message (invalid signature).
Once you have installed the software you will then run the program.
1. To Record data, click File and then Record ALDL Data.
2. You will get the warning that you only have 20 free uses and you will click ok which at this point will deduct 1 run from your available recording runs regardless of whether you get it to successfully work from this point on which is why I am trying to explain a little about each screen during the process.
3. Now that we are in the Serial Data Acquisition program. Click Setup and Com Ports and choose the Com port associated with your cable that I had you look up at the beginning.
4. Now we are going to tell the computer where to put our data and what the file will be called. So choose File and Open
5. Default is Testdata way down under the TTS datamaster program folder which is way to big of a pain to find once your done so I always put mine in the My Documents folder and if you have a lot of stuff in that folder already then you may want to create a TTS Data folder in your My Documents folder and then select your folder.
6. Now Give the File a name and since your sending it to me typically your First Initial and Last Name along with whatever chip version of mine your currently running and perhaps the date on the end is a good choice for the file name. Once you click OPEN the file is created and you are ready for some logging.
7. Now you will click Start and the Recs count at the upper right should start to climb to indicate the computer is logging data to that file created in step 6. Drive your vehcle around preferrably until that record count gets over 6000 records but if it really runs poorly then just do the best you can. I want some cruising around and use different gears and accelerate from low rpms to high at different throttle rates so I can get data in as many areas as possible and a few WOT runs and then before your stop your log let it idle in the drive way for a minute in park and a minute in drive and then click Stop and send that file to me via email to firstname.lastname@example.org I also recommend that you tell me what TTS Datamaster your using whether 8D, OD, E6, 85 or a few others that I see every now and then so that I open this file with the correct program.